waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Your one-stop search for water/methanol injected cars (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=31)
-   -   Setup for a 300zx with DP (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=3128)

pintovit 09-05-2018 05:45 PM

Setup for a 300zx with DP
 
Hi,

I'm building my shopping list to implement DP WI on my 300zx TT V6.

I'll be controlling the injection with my standalone and I'll be building my own tank.

Everything else, I need to get... So I made this list and I was hopping someone could point out if its correct, if I'm missing something or it contains something I don't need:
---- 806-400 ---- Direct port with 0.4mm 6x110cc jets - Std compression fitting
---- 806-239B ---- 1300cc Fast Acting Valve Fittings: 4mm+4mm
---- 806-249 ---- 4mm 15psi Checkvalve
---- 806-258 ---- In-tank filter
---- 806-259 ---- Hi-pressure inline 130um filter male/female 1/8BSP for HFS's (806-259)
---- 806-263 ---- 6 meters 4mm PTFE hose
--- 806-555 --- Replacement Flow sensor assembly Std (806-555)
---- 806-567 ---- Replacement Hall-effect Flow sensor cable
---- 806-581 ---- Replacement water level sensor
---- 806-582 ---- Replacement 160psi water pump

The basic idea is to have the pump turned on by the ECU (through a relay) when the system is active and then control the FAV using a custom table on the Link G4+

Thanks a lot for your time guys!


All times are GMT +1. The time now is 11:59 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.