Controlling FAV via standalone
 

Hello -
I've got a 00' Impreza STi and am currently running a HFS-3. I've since swapped out the ECU from a Power FC to a full Link G4 standalone. In the interest of integrating everything, I'd like to drive my FAV with one of my spare PWM Aux outputs on the Link. I can then map out secondary fuel/timing map and integrate my fail-safes. What frequency should I set the FAV channel at? I can go from 10-300hz via the Link. I did a search and found a recommended setting for the older HSV but I'm not sure if the newer FAV would be operated at the same rate.

Thanks in advance!

Ryan

Re: Controlling FAV via standalone
 

we always recommend running 30Hz. We cannot advise more details how we drive the FAV under various custom configurations.

Re: Controlling FAV via standalone
 

That's all I needed, thanks!