Quote:
|
Originally Posted by keithmac
My race pump flowed 600cc/min with a primer pump, the Shurflo was used when I went over to 1.5l/min. You may be better taking the time to fit the Shurflow as it can cope with any future upgrades, plus if you`re injecting straight methanol you`ll probably end up injecting quite a lot of it!.
|
well, that equates to only 9.6gph...half of what my goal is...
did you get 600cc/min because that was the largest nozzles you tried?
I'll give it a shot and see...maybe I'll HAVE to go to the ShurFlo...
thanks for the posted info...