Quote:
Originally Posted by MadMatt
Hello everyone !
I have got an aquamist system, but I've got few questions :
1) Is there a maximum pipe length for the one which goes from the pump to the intercooler ?
2) Is there a non-returning valve available to fit on this pipe, so there is an immediate response in the injection ?
3) How do I know which water jet size I need ?
4) As the pump will be fitted more than 1m away from the battery, which wire size should I use ?
5) Which manifold pressure switch do I need, considering the car will boost up to 2.3bars of relative pressure (3.3 absolute) ?
Thank you in advance for your help !
|
1) Two meters of 4mm is acceptable with too much poressure loss. We tried 12 feet of 4mm hose, we lost 10psi with a 1mm nozzle.
2) Yes we have a 15psi checkvalve 806-249.
3) 10 to 15% of water to fuel flow is normal without a tune.
4) If you need to extand the harness by another 3M, a #8/10AWG cable must be used.
5) We have 806-157 N/C pressure adjustable from 0.25-2 bar.