Quote:
|
Originally Posted by Richard L
This is an incredible build, keep the pictures coming.
If possible put the BOV (if used) nearer to the exit of the intercooler so that you are able to place the water jet/jets a good distance from the TB. This will allow water to mix with the air and more time to evaporate during the journey to the TB. As water begins to evaporate, droplet size will reduce. Smaller droplets will help better incyliner distribution.
Looking forward to discuss the water tank and pump loxcation.
|
Welcome on the boat...I intend to use a 6 gallon tank with a 2 quart surge tank...Will take pictures now of the trunk area..
In regards to the bov position a lot of people say to place it as close as possible to the tb, however after reading a bit I found a counterargument that I think makes sense...the air travels from the turbo to the tb through the intercooler, it makes no sense to heat soak the intercooler with air that you are not using...this is why I want to put it before the ic..