[Richard L]

Mr reply in green...

Originally Posted by proz07

1. good to hear ill keep that in mind later on down the road if needed

2. exactly the reason i want to use IDC not just BOOST and the HSF-3 just simplifies this

Good to know

3. yes currently the stock injectors later upgradding to 4x 1000cc secondaries but keeping the 550 or equivilant primaries so it should work out just right. and like i said ill be dropping the secondary transition % if i need to later after testing the system on the current safe tune on straight pump.

This seems to work out just perfect due to the smallish primary. This means you are able to go dwon as low as 22% form the secondary.

one other question though was the potentiometer for threshold. being that everyones IDC is different pending rpm and injector size and inj cycle style (batch,sequential, semi-seq) whats the reference miliseconds for the threshold settings? i.e. 12% equals ?? miliseconds 42%, 72% equals what milisecond on time?

The "RPM, milli-second, etc" calculation has already taken care of. Just dial in the %DC on the trimmer. (12% to 72%)

good info thanks

z