View Single Post
  #7  
Old 22-03-2010, 12:21 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: How much power should i be making once meth injected??

Quote:
Originally Posted by The Godfather View Post
yeah i gathered that i wont see power gains without tuning, i plan on getting it tuned right once installed,

im just after a rough idea on how much there is to gain, power wise...

100% water..... run 10-15% of water to fuel - with more timing and 24psi @9000rpm?? 10% increase in power? 15hp?

M50:W50 ....... 15-20% to fuelwith more timing and 24psi @9000rpm?? 20% increase? 30hp???

M100% ....... 20-25% to fuelwith more timing and 24psi @9000rpm?? 20-80% is that possible?
No.

If you are retain boost as is you will see single digit gains in percentage terms compared to what you have now.

Water = power loss (in my experience of your engine type) as it will be set pretty efficiently now on petrol at that power level)

Water/Meth = power the same or you will get gains if you lean it off and increase the timing (struggle to get more than 5%)

Methanol only = power gain, through cooling effect of methanol and its ease to burn, totally in relation to how much you inject! the more you put in to replace the main fuel supply the more it will cool and higher octane, max benefit at higher ratios would yield maybe up to 10% more power

*All of this is keep your original 24psi boost pressure*
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote