Quote:
Originally Posted by Richard L
Let me know if things returned to normal after removing the jumper link from ther FIDC.
Easily done - I did the same the other day durng my ongoing development work. It was weird.
|
All red herrings aside, I finally found the root of my problem tonight.
After doing a bunch of tests (pumping from water jug to water jug, reservoir to water jug, water jug through FAV to water jug, etc), I eventually decided to try a larger restrictor in the FAV. When I pulled the line off the FAV inlet, I noticed a small nylon hose shaving was plugging the .7mm restrictor inlet. Took the shaving out with a needle nose and I now seem to have full flow! The flow seems to fall off at higher RPMS (gauge goes from 2 up to 6 bars or so, then drops back to 3 by redline) but I'm going to confirm that tomorrow. I think I'm going to try non-progressive mode and see if the flow meter reports consistent X number of bars. Thanks for all the help Richard, you rock.