[nick_r]

Hi
What do you mean with cal. mode??
I put the jumper in bar test and turn with the sc button,i only can go from 0-5 elements.
Is that normal?I understand this function is to test bargraph.But the last 3 elements doesn't light up.
Also when i do a sys test(jumper in sys),full flow(red led on),i only have 5 elements
Today i did a roadtest,everything works perfect.
The spray is progressive with load.
But the gauge doesn't go farther then 5 elements.
I turned the sc potentiometer in every position and then full throttle.
If i turn the sc compleet to one side,i have 5 elements.Compleet to the other side i have no elements.
I don't know the duty cycle of my injectors,i'm runnig 850cc on a ej22 subaru engine with a gt35r.I did the test on 1.5bar boost(470hp)

Hope you can help me and understand me.