Quote:
Originally Posted by Richard L
Can you tell me what voltage you are getting from pin16 or bar ready with FDC linked at full boost and RPM. You can do it in low gear.
try setting gain higher but avoid getting the 95% red led to come on.
Richard
|
With the FDC linked, I'm getting full 8 bars above ~5000 rpm. ECU calculated fuel injector DC is ~75% at 5000 rpm. I don't know if the red led is on because the box isn't visible during driving.
I also tried trimming the gain, but it didn't seem to have any effect what so ever. With the normal flow gauge enabled, I'm getting 4 bars whether the gain is set to min, centre or max. Also the gain setting didn't seem to have any effect on the AFR readings. Very strange.
Below are two runs overlaid on top of each other. Solid lines are with gain set to MAX, and dashed lines are with gain set to MIN. AFRs (orange lines) are basically identical.
