[Ilkka]

Can you please see my questions below. Thanks.

Originally Posted by Ilkka

Is there any way to tell the absolute amount of flow by looking at the flow meter? There is a legend on the gauge which reads 100 to 400 ml/min, but is that with what SC trimmer setting? If that's with 'centre' setting, how is the legend changed when SC is set to max?

Originally Posted by Ilkka

What is the correct orientation for the 15 psi check valve?

http://www.aquamist.co.uk/sl/plist/p...9/806-249.html

Now I have them so that the 1 bar arrows are pointing towards the nozzles. Is that correct?

Originally Posted by Ilkka

With the FDC linked, I'm getting full 8 bars above ~5000 rpm. ECU calculated fuel injector DC is ~75% at 5000 rpm. Does 8 bars mean that the HFS-3 is seeing already 100% DC. How can that be when the real DC is only 75%?