Re: new install, pre turbo water injection
I tried running with both injectors yesterday. Didn't have time todo everything I wanted todo on the rolling road, as a had problems with a cam change between runs (long story)
When running WI, with a 270cc jet after the intercooler and a .7mm aquamist before the turbine it was over fuelling, afr 10.1!!! I'm guessing these jets are far to big.
My WI pump is 150psi, how do I calculate what size jets I need?
I'm guessing woth fueling that rich the data I logged is going to be no good to anyone?
Going a bit off topic, in a turbo'd engine running 25psi boost what AFR's would you set your tartget to both with, and without water injection?
Last edited by Codey; 12-08-2010 at 02:07 PM.
Reason: Grammer even worse than it is now.
|