thnaks for you help,
so my thoughts were not that bad
Back to the celica 3SGTE engine.
we have installed and checked flow today with "SYS" connector bridged
the celica has a GT28rs with 650cc injectors
will be boosting around 1.5 bar
so 650*4 = 2600 cc
20% = 520 cc/min
we have tested our installation, with two jets : 0.6 + 0.7
we get 545 ml/min
now do I need to apply a ratio to that figure to know what will be the real flow at 1.5 bar ? shoud I use smaller jet, or are we spot on ?
thanks