Re: Problem no power to gauge
Richard,
Yes unit is powering up now and we completed the purge. We are getting boost cut and no flow is showing (Was late so we called it a night). I will look at setting up the SC and the WL and WH which I believe are all at 0 on the pots (as shipped?), I am only installing and was told by the purchaser that the unit came with the pots pre-configured for the application. I now think that only the internal controller pots are setup and not the SC/WL/WH, we'll look at it again tomorrow.
Car is a Porsche 996TT
During trouble shooting I had power at the unit (power harness) so I was stumped why it wouldn't turn on. Everything was taped up and I focused on the controller since I had power to it but it wasn't turning on.
Paul
|