HFS-6 in 2004 Subaru STi
Installed a HFS-6 kit into friends/client's Sti the other weekend.
We utilized the stock trunk tmic reservoir, but installed float switch & inlet.
Ran the 6mm "hard line" where the factory had routed their lines.
The electrical harness was routed through the rear seat / trunk support
with the 6mm "hard lines". The only thing you see that has to do with
Aquamist in the trunk is the pump.
The engine was given the same treatment.
The only clue is the injectors and their lines.
Tried to cover everything we could with wiring covers.
__________________
02 WRX faux STi
ESX TMIC, P/P VF-30 (Deadbolted),
P/P Throttle Body, Colder NGK Plugs
Undrive Pulley, GP-Moto Header, K&N
Helix / Invidia TBE, Tein, STi
Aquamist 2D system
287 whp & 262 ft-lbs @ 16 psi
3XX whp & XXX ft-lbs @ 19 psi
|