Quote:
Originally Posted by Richard L
- The new swivel fittings are sent, it will have a "M" stamped on the back wall of the body.
- No need to flush the system. Try the new fittings first.
- I suggest venting it to the outside. Flambeau do sell a cap with inbuilt one way valve, perhaps get one of those?
|
Thanks.
When you are suggesting the vented cap, are you referring to putting it on the main tank that stands vertically? That tank already has a vented cap and I also have a tube running from the tank to under the car to vent.
The smaller tank (the horizontal one) is the tank that I am try to keep from leaking. I put another rubber gasket in the cap to try to see if it will seal better, but time will tell.
I'm leaving epoxy to the last resort. Here is a picture of my full set up to refer to.