yes, i ordered just when the system came out; install took a few weeks to carefully consider configuration options and ultimately map all out in my head, and a few days to actually tackle.
but i have been spraying hfs-6 in this config since then (for about 2 years?), so i have confidence in the way all is situated.
you've actually helped me a lot through email/phone/mail with some odds and ends over all this time
(Rob)
i just recently found this forum, decided to post the old install pics up.
car was tuned on dynapack with pe1820 a few weeks after install (i didn't bother asking for numbers/sheet, it is an automatic). same setup to this day, ~22 psi, very torquey on the spray.
i've laid a thin bead of rtv silicone at some of the pump seams/wire entry to help protect from water (all factory splash guards are in place, as well), and incorporated a bit of rubber spacers in the bracing to protect from vibration/jarring.