My WI has been working fine for the 2 months that I've had it installed, but it just stopped working last week. I noticed the fuse had blown, so I replaced it, but still the flow meter wasn't showing anything. I removed the jet (which the thread sheared off :cry
and put it into a bucket and manually activated the pump with the Sys jumper. When I do this, the pump just click, click, clicked rapdily for a second, and then nothing. No water came out of the jet.
At this point I'm guessing the pump is shagged, but I really don't see how it could have worn out after only 2 months.
Also, has anybody had any problems with the connectors that plug into the control module? They all have RJ11/RJ45 style plugs, but none of them "click" in properly into their ports, and they slide right out really easily. This happens on all but one of the connectors. I had to resort to electrical taping all the plugs in and wrapping it several times around the box. Needless to say this is a bit of a PITA to undo when needing to make adjustments.
Be keen to hear if anybody else has had these issues?