4 peel carpet.jpg
UNDO THE CARPET TRIM IN THE BOOT. hard and real fiddly. you can see a small self tapping screw from the pump sticking through. only a tiny bit. but dont worry. in that area. there is a polysyrene foam under the carpet. so no harm done whatsover
5 in boot.jpg
then drill a hole in the corner. so your wiring and pipe will come through. adjusted to the location of the pump.
6 hole blood.jpg
get a rubber gommet and insert it. ahhh blood.
7 hole routing.jpg
make a hole in the gommet for the plumbing. i cut the plug wire in half. so i didnt have to make a big hole. i then attached the plug wire back up with some quick release connectors, so i can disconnect anytime in future.
8 pump wires.jpg
pump with plumbing into car