Re: 2006 STi Gauge turns off when Blower fan is turned on
This is indeed very puzzling. I like to continue on some more diagnostic work if you don't mind. I have not had this happening on the v2 at all, thats why I am taking a special interest on tracking down the cause.
Are you using the wiring diagram for the 06sti on this site? Can you give me some help:
Where is ...
1. Red wire of the molex connector taken from.
2. The 12AWG red pump(+) cable
3. The red wire of the grey connector
I assume the red and black wire of the molex connector is grounded to a good chassis ground.
__________________
Richard L
aquamist technical support
|