Re: HFS-3 pump runs on after pull
The new board stops the pump as soon as the jumper is removed from the SYS port. Just as it should.
I've spoken to Jeff at Howerton Engineering, after going through what I've tested and what results I've gotten, he agrees that the board might be the issue. He agreed to send me another board and he said that he wants to look at the board I have here.
Jeff also had me try the same test with the gauge unplugged. The pump would continue to run on the same way. So I don't think the gauge is the issue.
Once I get the new board, I'll let you know how it goes.
|