Quote:
Originally Posted by Grant M
How is your IC too small? In thickness or physical overall size? I have just got myself a PWR charge cooler with complete kit for ?700. ?500 cheaper than brand new. With the position I am going to mount the rad for the CC the volume of water will never let the CC heat soak. And with the addition of WM injection it should be amazing on inlet temps. And the fact that here in the ukthe weather isn't that hot even in the summer should make it a great setup.
|
Overall size, its limited by the carbon air box and battery position, have to keep it cause of the rare nature of the car
If you run it non WI or spray it gets hot! back when I had it twin turbo and only on about 380bhp @ 1 kg boost it would pull about 70deg C charge temp in the top of 4th gear on a 28 deg C day.
I do dump allot of water on the IC, a trick I picked up of the old Benetton BMW F1 car when I red an article from their engineer who said how much they put over the core per lap in qualifying to keep the charge temps down to 45 deg C.