Quote:
Originally Posted by Richard L
I have just watch the video, it is difficult to see when the two leds coming on. By the way, sounds like a great deal of power on tap.
|
Thanks, I'm running just a base map with ~22psi. Can't wait to run 30psi
1. The yellow w.injection led light up first (as an indication system activation?)
2. yellow water level led light up right after.
3. w. injection led goes out after a few seconds during pull.
4. A few seconds after pull the water level led goes out.
Quote:
Originally Posted by Richard L
Can you confirm both led is yellow. If this is the case, you have the latest v11 gauge where the function of the top led has changed to "failsafe" activation instead of staying on full time when the system is turned on.
|
So yes both leds are yellow. The water level led looks green'ish' when its not on.
It seem I have the latest v11 gauge so what are the functions for the w.injection and water level led. Do you have updated manual for v11 version?
edit:
I've used the HFS3v1w1 manual but I just found 2 newer version and the
HFS3v2.13w is for v11. Is that the correct for me?