[32Krazy!]

thanx for the fast reply richard.
the s/c is oem built by ihi for mercedes. electromagnetic clutch on the s/c pulley. no boost until 2000 rpm then wham! full boost builds.
teflon coated rotors so i have been told not to spray pre s/c. your thoughts?
i was referring to a 70% water 30% meth as i want to use this for iat control. not really wanting to tune for meth.
am i correct in reading that a gal of mix would only last for 7 to 8 passes? i typically run at the start of the day with 1/2 tank (approx 7 gals fuel ) mixed to 105 octane (torco fuel additive)
i am starting to think the electronics may be beyond my abilities . i may need a shop i know to install this