Re: FCM Problem
The soldering is good.
Next we will check the system operations:
1. Unplug the 6mm hose from the FCM. "TST" jumper if theer are pressurised water coming put of the hose. If yes continue to step 2.
2. Re-instate the 6mm hose. Unplug the 4mm hose from the FCM (remove restrictor if there is any). "TST" jumper and see if there are any water coming out of the FCM. If yes, let me know if the gauge shows reading.
I await your results...
__________________
Richard L
aquamist technical support
|