Re: FCM Problem
Harness is ok - order is same as for other cables.
As for voltage - thick red, thin red and blue have positive voltage always (in tst mode and in normal) - can't tell what voltage is there exactly, will test with tester today. But, if I give 12V to red and blue cables directly - there is no response. Pump is not working, relay is keeping silent. What can this be? Relay faulty maybe?
One good thing I found out yesterday. With following pins shortened at the same time: "IDC", "PRK", "TST", "INJ" and shortening thick black and red cables on relay water is coming out from thin hose (OUT of FCM). If I shorten "IDC", "PRK", "TST" and black and red cables water is comming only through thick hose, but not through FCM (closed) - is it normal.
|