Re: Fav not opening
After doing as you suggested, Taking the PRK jumper and placing it on the SYS pins, I got water out of the jets .I then removed the jumper and went for a drive.With the jets at the windshield in front of me, I could see the spray as my boost built,Good! I then came home and installed the jets in the intake manifold, intercooler piping,and ran the feed lines to them from the FAV.I then went back out to check the flow and set the SC.Upon boosting, the lights for W.Injection, and Boost Enabled are coming on, but I am not seeing any Flow.
I tried the jumper on SYS again, but this time it doesn't work.I can hear the FAV humming, but it clearly not opening.What do I need to check?
Thanks, Philip
|