Re: Water level indicator
Will check the wires order later on today (thanks!).
On p.2: from the manual I had an impression that B led indicates that no boost-cut is active. I.e. even if the failsafe is operational (DFS unlinked) I should still see "B" when the system is working normally and hence the BCS is operated by ECU with no HFS-3 interference. On the initial tests when revving the staying car to get some bars displayed on the gauge I think I saw "B" light blinking once the the bars appeared. WL was turned all the way counterclockwise - so I thought once at least one bar is displayed it falls in falsafe window and voila - failsafe mode turns off.
Do I now read it correctly that "B" light should appear only in DFS mode? Hence, with DFS unlinked I should not see the "B" light and the blinking I got means something is wrong?
|