Re: Water level indicator
When I mentioned that I hooked my HFS-3 dimmer input to the CAN-bus I meant that I used an ILL out on a CAN bus adapter for Alpine stereos. This CAN bus adapter should exactly produce a +12v on its ILL out (I'm not sure whether it does, however).
Do I read it correctly that oscillating voltage on dimmer wire of HFS-3 controller may result in my dimmer issues?
PS. always happy to help - basically just conveyed the info you provided to me earlier, you should keep an eye on what I'm posting there however as I'm not much into electronics at all )))
|