Quote:
Originally Posted by Kapt. Q
ECU pin 39, wire colour green, Intake manifold pressure sensor.
ECU pin 72, wire colour blue, Injector 1 (can't remember if this is pos or neg, will check, think it neg)
ECU pin 68, wire colour Blue, BCV
|
Thank you for the info.
Do you have a more comprehensive detail of the ECU pin arrangement. I like to draw an outline of the ecu. If at any time you can unplug the ECU and take a few pictures of the pin-out side, I will be able to make an drawing from there. Don't forget to tell me where pin 1 is.
One more pin that will be very useful. A switched +12 for the red wire of the gray harness. This will make the wiring of the grey harness a deal deal simpler by not having to slit open the vinyl sleeving and pick out the red wire out of the bunch.