Re: Aquamist HFS-3V2 Not injecting
yep this is a di mazdaspeed 3. The board was cut and soldered by rich. It was wired in using the latest diagram. The system see's the di pulse and ramps up and down with rpm. Also the system triggers around 37%idc like I have it set using the thres trimmer. i'm going to take some videos this weekend of the pump flow and spray pattern when I have time to troubleshoot the kit because honestly I have no idea what is considered strong and not strong as this is my first meth kit. also iirc when I used the sys test jumper no bars showed up on the gauge.
Last edited by 2.0t03speed; 04-02-2014 at 03:25 AM.
|