Re: failsafe setting
Befor I unsolder x1.5 to linking x2.5 pre-amp gain. I check again FDC x 1.5. My gauge displayed upto 7 bars around 85%. So I still kept the pre-amp gain x1.5. Also I log my real fuel injectors duty cycle to compare with aquamist FDC. I found when real fuel duty cycle is 30 % the FDC is 36%. Real fuel duty cycle is 40% the gauge FDC is 50%. When real fuel duty cycle is 50 % the gauge FDC is 65% and real fuel duty cycle is 60% is gauge FDC is 85%. So may be I need to trimmer decrease IDC trimmer ? But I do not know which direction ( CW or CCW ) is decrease ? any advise thanks
|