Quote:
Originally Posted by Howerton Engineering
The .3mm jets are filtered because the jet hole is so small, and the spinner grooves very shallow it will plug with debris very easily. Lesson learned from years ago so filters were added to mitigate this.
|
Thanks for clarifying. Am I OK with my setup if I?ll add 2x0.4mm jets for my current setup and there?s no danger of clogging those small jets?
What is the difference between those two 0.4mm (B vs C) jets on the chart?
http://www.aquamist-direct.com/806-3...or-4mm-hose-r/
Which one is nro. 806-301?