Re: Direct port injection with DI
What is the expected power from the mods? It will help to size the jets.
I think one nozzle immediately after the IC is sufficient.
Assuming you are in the region of 350hp, you can inject around 350-525 (1-1.5cc/hp) pf M50/W50. Divide 500cc between 4 +1 (ports and IC) will be approximately 100cc per nozzle.
I can be more accurate once you have posted your power.
Q1. What is your reason for port injection? Lack of fuel?
Q2. What tank space is available? This is for trunk installation?
__________________
Richard L
aquamist technical support
|