Quote:
Originally Posted by Richard L
You can cut the wire marked x. Splice in the grey and white wire of the Grey connector (HFS4)
You have posted a HFS6 diagram/manual instead of HFS4. Please correct before confuse others.
 |
Thanks Richard. I have swapped in the correct photo from the HFS-4v3 Manual.
To make sure I understand correctly you stating to cut and intercept one of the lines (either grey or brown since polarity is not important) going to the boost solenoid. The white HFS-4 wire of the grey ECU connector will go to the controller and the brown HFS-4 wire of the grey ECU connector will go towards the boost solenoid as displayed in example #2 of the HFS-4 manual. Is this correct?