Thread
:
HFS-3 'box/control unit' sending voltage out the green wire, HELP.
View Single Post
#
3
05-07-2015, 06:15 PM
The Alchemist
Junior Member
Join Date: Mar 2012
Location: Doylestown, PA
Posts: 9
Re: HFS-3 'box/control unit' sending voltage out the green wire, HELP.
I did as you asked, and with the connector plugged into the H3 controller, I see ~10.1v with Key on, engine off, the positive side was 11.5v. Then I unplugged the connector from the H3 controller, and I see 0v.
Attached Images
key on engine off connected to the H3.jpg
(77.3 KB, 10 views)
Last edited by The Alchemist; 05-07-2015 at
06:25 PM
. Reason: Spelling.
The Alchemist
View Public Profile
Send a private message to The Alchemist
Find all posts by The Alchemist