[Maktech]

I don't have any idea for the 1st one and the 2snd one ,
We haven't changed them , please tell me how they must be ( if possible with a photo) ;
We've soldered the 3th one , the wiring of G63 and CLS63 say that the thin cable must be cut and soldered to 2,5 .
if you look at the wiring , you can see it.
I read the instructions about Direct Injection system ,
it says like this :
"The HFS-4 has three pre-set amplifications. x1 (default), x1.5 and x2.5. x2.5 will cover 95% of pulse duration systems of 0 to 5mS (common DI systems). . "