Re: Using water-only system year-round? Feedback?
Wow. Listen, I intervened to prevent people thinking it is normal to tune to knock with WI. Now, that does not mean we can not tune an engine as close to knock as possible. Like when the fuel has too low of an octane to support the cylinder combustion pressure leading to fuel auto ignition (knock).
Tuning to MBT (except for idle) should be the ultimate goal as it gets your engine a fuel efficient (torque) burner. I have seen a few engines blown using WI and guess what, all failures were a combination of not enough WI and TOO much timing. So these engines ran for a while before failing. These were not my tunes but I saw the maps afterwards.
Again, if you operate a 4 liter engine to 400 hp and then ask a 2L engine to crank 1200hp then guess what an excess of just say 5 degrees past MBT will do... It just won't last as long. You also lose power past MBT.
Can you tell us how much power the engine is producing?
What is the total WI volume you are spraying?
|