[parmas]

Originally Posted by rotrex

If you go for a secondary methanol injection, you might consider fuel injectors.

FUEL INJECTORS COULD NEED TO BE FLUSHED AND METHANOL INJECTORS ARE EXPENSIVE AND NORMALLY FLOW MUCH.

This allows for full sequential injection . Do you have a cam sensor to run sequential?

YES. RUNNING FULL SEQUENTIAL

Does you ECU support a second injector bank incl. transition management?

PROBABLY YES BUT I HAVE TO CONFIRM WITH HALTECH

Power wise sequencial makes no difference. It is purely done for emissions reasons.

I DON'T AGREE. EFFICIENCY MAKES POWER EVENTUALLY

If you need additional water, just use you WI system.

A HIGH PERCENTAGE OF METHANOL IS BEING CONSIDERED

If you want to avoid valve wetting, you need direct injection.

AGREED BUT NOT WITHOUT MATCHING INTAKE TIMING

...........