22-05-2016, 09:45 AM
|
Senior Member
|
|
Join Date: Jun 2013
Location: malta
Posts: 210
|
|
Re: Flow vs Pressure
Quote:
Originally Posted by Richard L
- Water causes sever corrosion on iron alloy than methanol. Fuel injectors will seize.
What mixtures/flow% do you recommend then?
- There is also issue regarding using an intermittent pump for continuous duty.
The pump will not be used continuous but on demand according rpm and boost. Check ecu table attached. Also check attached screenshot directly from Aquatec. The pumps could be used to run continously for hours
- 300-400psi line pressure will impede the operation of and inline valve.
You mean the check valve ? If the cracking pressure is 15psi, the valve still needs 15psi before opening. The only possible issue is if the valve withstand the 300-400psi range
|
..........
Last edited by parmas; 22-05-2016 at 10:03 AM.
|