Quote:
Originally Posted by Richard L
There are two FAVs with flow rates 1600cc (806-239) and 1300cc (standard 806-239B).
|
Richard just noticed the attached statements :
Aquamist FAV : Warning: never run hydrocarbon contaminated fluid through this valve. The internal EPDM seal is subject to severe swelling if 99% pure methanol is not used. Always use 99% methanol from a factory sealed canister. Transfer pump or jugs should be free of any previous hydrocarbon usage. Washing the container with detergent will not stop methanol drawing out the hydrocarbon from a plastic container laced with gasoline.
Aquamist Pump : Warning: Prolonged use of 100% methanol may cause
premature pump failure and may not be covered under
warranty - this warning applies to all Aquatec pumps.
Is this contradictory? 99% Methanol may damage pump while less may damage FAV....