Quote:
Originally Posted by parmas
1600cc what I calculated, It could be more or less but better be prepared for much than for less.
If you know one big pump ready for methanol able to use 150+psi pressure and flow 6400cc/min please share.
I will not have issues with starting cause I will work with pump fuel for starting/idle/cruising/low boost. At certain boost levels the base fuel will eventually be replaced by methanol injection.
Seems like the best possible setup a street car should actually have although I am ready for critics to say their way.
|
I have just remembered your set up is based on progressive pump speed (PPS) rather PWM valve. Ignore my PWM valve remarks.
If you are flow this large amount, I am not sure the PPS algorithm will work satisfactorily due to the non-linearity and dynamic range.