Quote:
Originally Posted by Richard L
Question:
There may be a mis-match of map sensor. The controller is set to read from a 3-3.5bar map sensor, does your car boost over 30psi?
Move the PIR trimmer fully clockwise and let me know if it increases the flow reading.
|
Hey Richard,
So setting the piR trimmer fully clockwise gives a little better linear reading it seems like the meter picks up the flow a little better but I still have the SC dial maxed out clockwise, the bar graph maxes out at WOT though. Also I'm probably close to 20 PSI boost right now and don't think I'll ever see over 25psi. Thank you again.