Quote:
|
Originally Posted by turbor850
Hi, I have just recently purchased my 1S system. I was just pre installing everything and when I put the tube for the water source to the pump (where the orange thing is) it went in and is now stuck, it has just a little play to it, but won't come out. Will this cause any problems ? Will this leak when the pump is pumping water ?
Thanks !
|
The side of the pump where the orange thing is is the output, to the injector.
If you push the orange thing down a bit, you can remove the hose.
The play is normal and it probably woun't leak there. Make sure it's pushed in all the way (which isn't far) at final installation
Janis