Quote:
|
Originally Posted by JohnA
Holding 1 bar with uprated FMIC is not really W.I. territory in my opinion.
You're not getting ridiculous charge temps after the IC, so the cooling function of the water is limited.
Now if you were holding 20+psi, I understand...
I wouldn't trigger the WI before 14psi, as it would bog the engine down, especially now in the winter.
|
It would appear that i left it a bit late in the year to set up :sad:
Should be fine for next summer, part of my plan was to get WI installed before i get the software RR remapped, i going to try and persaude the tuner to increase the boost map to take into account of the WI. Have to put failsafes in place to disable boost if water is low or WI switched off.
Not sure how to do that with the zlet though. Any ideas :?: Seen the circuitry on this forum, but im not sure how to disable boost electronically.