TAZ, are those beverage tanks? Looks like.
Are you using a pump or you just fill the tanks half and put pressure air on them?
I wanted to try this: a tank like your, water and/or methanol, pressure air and a line to a fuel injector placed before the throttle body.
To spray just apply a voltage to the injector!
No valves, no nothing. You can also modulate the voltage to obtain more or less liquid depending for example on the manifold pressure.
Or just a simple pressure switch.
The water temperature doesn't matter: the evaporation energy of water is about 100 times higher that the caloric energy, so you will cool the same using 5?C or 90?C water (40F or 195F).
|