At the moment i'm injecting 80% ethanol 20%water into the compressor of turbo at 14 gph. not sure what percentage of fuel that is. I will shortly experiment with a 40%mthanol 40%ethanol 20 % water mix. then 80% methanol 20%water and finally 100% methanol.
I want to see which one gives me the coldest intake/exhaust temps and the most power without pinging. The reason im injecting before the tubo is that i have heard humidifed air of 40 micon paritcles or less can increase compressor efficieny without damaging it?
Since i dont use an intercooler cooling is of greatest importance to me. with my current 80% ethanol 20%water into the compressor mix my intakes temps at 15 psi boost are 90celcius and exhaust is 1470celcius at 130 kmh just after a 0-100kmh run.
|