Quote:
Originally Posted by MikeWarner
No photo, but it is mounted right after the IC and before a long straight section. The spary comes in at about 12 psi. I will be trying a 0.3mm jet soon.
|
I'd try the 0.4mm jet activated at 16psi. See how that goes.
Also if the AFRs at 16psi are way richer than 12:1 it will be hurting power.
You need to monitor that as well. 10-20% methanol helps reduce the surface tension of the water. Make sure you only use distilled water and pure methanol in the mix. Nothing else.