Quote:
|
Originally Posted by fastrick25
Ok i just bought a kit of ebay that uses a 100psi pump, it comes with an m4 spray nozzle which sprays 4pgh.I plan on using the kit mostly for its cooling and knock reduction abilities not for simulating race gas.I was thinking of running 70%water/30%alcohol to get the desired results.The vehichle is a turbo eagle talon with a b16g which is making close to 300hp at the crank.If anyone has any suggestions please let me know.Thanks
|
Welcome to the forum!
I have a 1g DSM with a small 16g and run a 50/50 mix of distilled water and methanol. This is the combo that has worked the best for me in reducing knock and cooling the intake charge, as I am WAY out of the efficiency range of this turbo at 5000ft (20-21psi).
I think the best advice is to experiment and see what your set-up likes.
Enjoy,
Craig