Yes you can use the FIA2 and it will drive two high speed valves. Doing so will require a selection of nozzles so that you can get the correct balance.
When the 2e is avalible you will be able to do some for the fine tuning from the 2e control which will be plug and play with the 2d (FIA2)
The 2e will have a feature where you can change the duty cycle to the highspeed valves in relation to the injector duty cycle. If you desire to increase the water injection by 20% compared to fuel injection duty cycle just turn the control knob. I should be adjustable at least 20% up or down.
It will also have a control so that you can start the injection at a specific fuel injector duty cycle.
Using the Shurflo pump will cause you to loose the blocked jet feature. The blocked jet feature will not work correctly when using more that one jet.
__________________
Brad
|